L5705 high-speed CNC upward hard broaching machine is my company independent research and development has the intellectual property rights of products, the main components through 3D modeling,3D analysis,through the use of advanced manufacturing methods to produce the first domestic high speed CNC pull hard on broaching machine.This type of broaching machine processing efficiency is high, and machining unit cost greaty reduced, Optional automatic material delivery machine, (truss manipulator or robot)
The broaching machine mainly for hot after the workpiece inner hole, inner spline internal tooth and all kinds of different shape plastic processing;Artifacts by broaching parts of the highest hardness can reach above HRC60, the machine is to improve the inner hole of the workpiece, the internal spline, surface roughness and the tooth profile accuracy of internal gear and other key equipment.
Cemented carbide cutting tool sharpening one time korah artifacts nearly 10000 PCS, total of around grinding about 15 times
Application
FAQ
How to operate horizontal broaching machine?
1. Lubricate according to the lubrication requirements before work to prevent grinding accidents.
2. Check whether the position of each operation handle is correct, and the stopper of each stroke limit must be firm.
3, start the oil pump, first pull rod air travel several times to exclude the air in the hydraulic system, and check whether the limit switch is good, the pressure gauge is normal, check whether the hydraulic pipe, oil pump oil, pull rod, screw, guide rail is brushed.
4, in the work of the tool must be firmly installed, loading and unloading tools, workpiece to prevent damage to the machine tool. According to the processing of the workpiece, adjust the working speed of the pillow and the position of the return and reverse collision and tighten it.
5, in the work of fast tool alignment, in the cutting process, the tool is not allowed to stop before withdrawing from the workpiece.
6, to prevent cutting, water and other debris into the motor hydraulic box.
7. After work, retract the pull rod back to the cylinder and remove the broach.
Audited Supplier 
){kind=link}