Special Broaching Machine Tool for Broaching Automobile Steering Wheel Skeleton
This kind of broaching machine is a special machine tool for broaching automobile steering wheel skeleton. lts structure is similar to that of general pull-up broaching machine. But in the design of worktable, we adopt the turning-down mechanism.Because of the large volume of steering wheel, the internal space of the machine tool is optimized as a whole, which is convenient for loading and unloading. Especially for enterprises with large amount of material, we add hydraulic shift to the traditional machine. Moving table to realize full intelligent manufacturing. The steering wheel is usually made of magnesium-aluminium alloy. This kind of material has very high requirements for the environment. Therefore, the machine tool has been designed in anticorrosion and fire protection.
Application
FAQ
How to operate horizontal broaching machine?
1. Lubricate according to the lubrication requirements before work to prevent grinding accidents.
2. Check whether the position of each operation handle is correct, and the stopper of each stroke limit must be firm.
3, start the oil pump, first pull rod air travel several times to exclude the air in the hydraulic system, and check whether the limit switch is good, the pressure gauge is normal, check whether the hydraulic pipe, oil pump oil, pull rod, screw, guide rail is brushed.
4, in the work of the tool must be firmly installed, loading and unloading tools, workpiece to prevent damage to the machine tool. According to the processing of the workpiece, adjust the working speed of the pillow and the position of the return and reverse collision and tighten it.
5, in the work of fast tool alignment, in the cutting process, the tool is not allowed to stop before withdrawing from the workpiece.
6, to prevent cutting, water and other debris into the motor hydraulic box.
7. After work, retract the pull rod back to the cylinder and remove the broach.
Audited Supplier 
){kind=link}