This series machines are designed for broaching intermnal tooth, internal spline and the geometry of the hole, high production eficiency, suitable for mass production.This series machine adopis hydraulic transmission, the work is smooth, can stepless speed regulation, and has the overload safety devic .Machine has automatic circulation mode, semi-automatic segmentation, manual adjustment of three operating modes.Machine tooloperation by a total button control panel, easy to operate.
The automatic toolholder with the machine is suitable for state standard broach that front shank is cylindrical(without periphery positoning).Toolholder should be specially designed and produced for nonstandard shank or rectangular shank broach which for key slot processing.
Application
FAQ
How to operate horizontal broaching machine?
1. Lubricate according to the lubrication requirements before work to prevent grinding accidents.
2. Check whether the position of each operation handle is correct, and the stopper of each stroke limit must be firm.
3, start the oil pump, first pull rod air travel several times to exclude the air in the hydraulic system, and check whether the limit switch is good, the pressure gauge is normal, check whether the hydraulic pipe, oil pump oil, pull rod, screw, guide rail is brushed.
4, in the work of the tool must be firmly installed, loading and unloading tools, workpiece to prevent damage to the machine tool. According to the processing of the workpiece, adjust the working speed of the pillow and the position of the return and reverse collision and tighten it.
5, in the work of fast tool alignment, in the cutting process, the tool is not allowed to stop before withdrawing from the workpiece.
6, to prevent cutting, water and other debris into the motor hydraulic box.
7. After work, retract the pull rod back to the cylinder and remove the broach.
Audited Supplier 
){kind=link}