The machine tool is a special broaching machine developed for the processing of slider groove of air compressor.The machine tool is a double-position pull-up broaching machine with 2-4 pieces of workpiece broached at one time,which has high production efficiency. Because of the deep groove and high precision of the slider groove, the traditional process of milling before grinding is adopted and the processing cost is high. The machine tool can be broached and formed at one time, which greatly improves the working efficiency.
Application
FAQ
How to operate horizontal broaching machine?
1. Lubricate according to the lubrication requirements before work to prevent grinding accidents.
2. Check whether the position of each operation handle is correct, and the stopper of each stroke limit must be firm.
3, start the oil pump, first pull rod air travel several times to exclude the air in the hydraulic system, and check whether the limit switch is good, the pressure gauge is normal, check whether the hydraulic pipe, oil pump oil, pull rod, screw, guide rail is brushed.
4, in the work of the tool must be firmly installed, loading and unloading tools, workpiece to prevent damage to the machine tool. According to the processing of the workpiece, adjust the working speed of the pillow and the position of the return and reverse collision and tighten it.
5, in the work of fast tool alignment, in the cutting process, the tool is not allowed to stop before withdrawing from the workpiece.
6, to prevent cutting, water and other debris into the motor hydraulic box.
7. After work, retract the pull rod back to the cylinder and remove the broach.
Audited Supplier 
){kind=link}